| 
            How to buy a gasket if you live within the USA Click the "Buy Now" icon below to pay with Credit card or
            Paypal account. -- Or --
 Place your order by telephone by calling 651-368-9479 to pay by 
            credit card.
 If you live outside the USA, please e-mail me to get a shipping quote
            and make purchase arrangements. | 
          
        | 
             302 and 354 Dial Gasket
 | 
          This is a gasket that I have had custom made. It's an exact fit
    replacement for the 302 dial gasket. This gasket is die cut and not molded, so it doesn't
    have the grommets for the brass ferrules. Replace the brass ferrules with small washers.
           
            | **$1.00 added for postage** |  
            | 1- $4.00 |  
            | 2- $3.50 Each |  
            | 3- $3.25 Each |  
            | For any quantities not shown, contact me for
            shipping costs. No further price breaks are available. |  | 
          
            |  | 
          
        | 
             Sculptura Base Pad
 | This is an exact reproduction of the base pads used on the
    bottom of Western Electric Sculptura phones. It's peel and stick, so you
    just need to clean the bottom of the remains of the old pad before easily
    applying the new one. 
          
            | Quantity: | **$1.00 added for postage** |  
            | 1 | $6.50 |  
            | 2 | $12.00 |  
            | 3 | $17.00 |  
            | For any quantities not shown, contact me for
            shipping costs. No further price breaks are available. |  | 
          
            |  | 
          
        |     
         Reproduction Princess Base Pads
 | These are a high quality die stamped exact reproduction of the 702 and
        2702 Princess base pad that are designed for use with phones that have 
		the M1 ringer. Made of a durable rubber & cork combination the same as
        Western Electric used. These will also work on a 701. These are self stick with a peel off
        backing. the adhesive is high quality and sticks tight. To replace your base pad, just heat up the old one and scrape it off, it's very easy to
        do. A heat gun or blow drier will work.
 
          
            | Quantity: | Shipped within the USA |  
            | 1 | $5.00 +  $4.80 Shipping |  
            | 2 | $9 ($4.50 each) +  $4.80 Shipping |  
            | 3 | $12.75 ($4.25 each) +  $5.40 Shipping |  |